NUMERICAL ANALYSIS OF FASTENERS USED IN CIVIL ENGINEERING STRUCTURES - CSTB - Centre Scientifique et Technique du Bâtiment Access content directly
Conference Papers Year : 2020



When it comes to providing connection between different components, post installed mechanical fasteners can always offer a suitable solution. Their level of performances is nevertheless a concern, due to the consequences it may cause if they were inappropriately chosen. In order to avoid unexpected low performance of the fasteners, it is important to have a good knowledge regarding the mechanical behavior of fasteners to guarantee the durability and the efficiency of the structure. This issue can be raised in the case of French nuclear power plants, where the decision to extend the duration of life is at stake. In addition, except for newly installed anchors, most fasteners used in nuclear power plants have not been specifically qualified to demonstrate their capacity to support seismic loading. In recent years, CSTB (Centre Scientifique et Technique du Bâtiment) carried out experimental tests on fasteners used in nuclear power plant. The results showed that the shear capacity of these anchors subjected to seismic load is relatively low with respect to a static loading, which highlighted a need to study in more details their behavior. It should be noted that these qualifications were not requested when the fasteners were installed. The scientific approach is to use two additional modeling techniques to assess the fasteners behavior with seismic loading: At the fasteners scale, the concrete crack will be explicitly described by a discrete model and at the structure scale, a simplified model using generalized variables will be developed to represent the non-linear behavior of the fasteners. The parameters of this model will be defined by the discrete model. In this paper, only the part at the scale of fasteners is presented. In order to complete the experimental results, a numerical study is proposed, in this paper, to predict the behavior and the capacity of the fasteners under various loading. This study was done using a discrete element method, which allows to explicitly represent the cracks induced by the seismic event and the associated mechanisms (initiation, propagation, closure and unilateral effect, friction). After a brief description of the discrete model, the new meshing procedure, taking into account complex geometries, is presented. Then, 2D and 3D numerical results carried on headed stud for static loads are discussed. Finally, they are compared against experimental data. The discussion focuses on the capacity and the limitation of a 2D numerical model to predict the behavior of fasteners and the necessity to move to a 3D modeling.
Fichier principal
Vignette du fichier
fib_paper_Aya_RIMA.pdf (887.06 Ko) Télécharger le fichier
Origin : Files produced by the author(s)
Licence : Copyright

Dates and versions

hal-03233882 , version 1 (25-05-2021)


  • HAL Id : hal-03233882 , version 1


Aya Rima, Cécile Oliver Oliver-Leblond, Frédéric Ragueneau, Thierry Guillet, Marie Helene Bonhomme, et al.. NUMERICAL ANALYSIS OF FASTENERS USED IN CIVIL ENGINEERING STRUCTURES. Fib Symposium 2020, fib, Nov 2020, Shanghai (online), China. ⟨hal-03233882⟩
143 View
14 Download


Gmail Facebook X LinkedIn More